Surveillance
OLYMPUS DIGITAL TELE-RECORDER
- Over 35 hours digital recording
- USB connection to PC
- 4 recording qualities (XHQ/HQ/SP/LP)
- 4 folders for file management (A/B/C/D)
- Voice activation (VCVA)
- Slow/Fast playback
- Alarm playing
- Timer recording
- Index setting
- 400 recording files
- 64MB internal memory
|
 |
UHF Telephone Transmitter
Distance : 150m
No battery required
Size : 22x12x12mm
|
 |
TELEPHONE LINE MODULE (TLM)
The telephone line module is used where it is required
to listen into the room via the telephone line.
TELEPHONE LINE |
 |
|
Digital Tele-Recorder
Only activate when phone in use
Recording time 8-16 hours
Software included for pc download
Powered by 2x AA batteries or mains adaptor included
|
 |
TELEPHONE EQUIPMENT
TELECORD
This device converts any tape recorder with a microphone
and remote socket into an automatic telephone recorder.
This Telecord has two wires which connect across a telephone
line and also has two jack plugs connected to it. One
goes into the microphone socket of a tape recorder and
the other into the remote jack. The tape recorder is then
set to record and will automatically switch on whenever
the phone is used, so recording both sides of the telephone
conversation. The recorder will switch off when the phone
is put down.
The telecord can be fitted at any point on the phone line
so providing discreet monitoring of a particular phone.
The telecord can also be supplied fitted with an RJ11
telkom plug and a double adaptor.
TCD - two wire Telecord

TELECORD
|

TELERECORDER
|
TELERECORDER
This is a recorder with additional electronics
installed inside the machine. The recorder is connected
across the phone line to be monitored and will automatically
switch on whenever the phone is used for an incoming or
outgoing call.
As with the TELECORD, the TELERECORDER can be fitted at
any point along a telephone line.
TRD – Telerecorder
WIRELESS RECORDING
THE TR33/UR33 WIRELESS RECORDER is also
a telephone transmitter system, but the receiver is built
inside a tape recorder, making it simpler to use.
The transmitter is attached to the line and the recorder
is placed within range. The recorder is put onto record
but will only start recording when the phone is used.
It switches off automatically when the phone is put down.
TR33/UR33 SYSTEM
|
TELEPHONE SECURITY
LINE GUARD
Most telephone tapping equipment 'knows' when a phone
is being used by detecting the change in voltage on the
phone line when the phone is picked up. The telephone
line voltage is typically 50 volts and drops to around
10 volts when the phone is used. The line guard prevents
the voltage dropping to such a low level when the phone
is picked up, so the 'telephone tap' does not realise
that the phone is being used.This particular line guard
also has an anti-vox circuit, which puts a continuous
tone on the line whenever the phone is put down. This
causes a voxed, (voice activated) recorder to run continually
when the phone is on-hook, so using up the tape and batteries
even when the phone is not in use. This model also has
a safety level control, which allows adjustment for maximum
security on any phone line to which it is attached.
LINE GUARD LGD

LINE GUARD
|

TAP TEST
|
TAP TEST
This provides a reliable method of checking for the
presence of tapping equipment on a telephone line.
Please note, in order to use the TAP-TEST it is necessary
to disconnect the telephone line, either at the street
box or exchange. i.e. the line cannot be tested whilst
it is powered by the voltage from the exchange.
By connecting the leads of the tap-test to the disconnected
line an LED will indicate if a parallel tap is connected
across the line.
If the ends of the line are now shorted together a test
can be made to identify the presence of series tapping
equipment.
TPT – Tap Test
TAP ALERT
This device plugs into a phone line and will cause
an L.E.D. to flash if the line is shorted or cut
for more than a few seconds. It will continue to
flash until the user pushes the reset button.
TTR – Tap-Alert |
 |
|
A recorder with additional electronics installed
inside the machine
The recorder is connected across the telephone line to be monitored
It will automatically record when telephone is in use-incoming
and outgoing calls
It can be fitted at any point along the telephone line
Used to convert any tape recorder with a mic and remote socket
into an automatic telephone recorder
It has two wires which connect to telephone line and two sockets
which connect to recorder and would make the recorder only record
when telephone is in use
DDR-2132
8/16 Hours DIGITAL VOICE RECORDER
Ultimate in Digital Voice Recorder Technology
USB interface: Support various applications
and quick uploading and downloading
USB Hard Drive Function: You can use
our Digital Voice Recorder as a portable USB hard drive
or data back-up device. You can save any file format (MS
word, doc, txt, zip, jpg.. so on) into our Digital Voice
Recorders. You can also send these files to someone by
using our DV-Explorer software.
Alarm clock function: can be set with
messages or sound and play automatically at the requested
time to alert you to some action and give you the information
Timer recorder function: can receive
and record radio broadcast automatically daily, weekly
or monthly
Repeat & A-B repeat function: can
play over and again as you chose interval A-B
Various playback speed: can select 3
steps -Fast, Standard, Slow- can be controlled by 20%
speed up & down Total 495 messages with 5 separate
files(99 messages in each file) : can be recorded and
search played in 5 different files up to 495 messages
ARS(Automatic Recording System): prevents
unnecessary recording when there is no sound or voice
Mode / Pause
1. Mode : easy to select SP(short time play) and LP(long
time play) mode
2. Pause : During recording or playback
GENERAL SPECIFICATIONS
In Out Jack
-External Mic/line in : Mono 3.5(IMP. less than
3k)
-Ear phone : Mono 3.5 mm
-USB port
-Built-in condenser microphone
Speaker - Diameter : 25mm(IMP. 8 Ohms)
-Max output : 100mW at volume max
Input : Built-in microphone & external microphone
(line-in)
Output : Built-in speaker & earphone (line-out)
Power supply -Battery AAA size(LR-03) x 2EA ,
DC input : Built-in DC jack(DC 3v)
Battery life : play 8 hours / record 10 hours
Sound output : 100mW(speaker) / 5mW(earphone)
Microphone sensitivity : -38dB
Memory back-up time : 60sec
Dimension : 104.5 x 31.6 x 16.6mm
PC interface
System requirements : recommend more then 200MH
cpu, more than 64M ram, 20MB of free hard space
OS : Windows 98, Windows ME, Windows 2000 Sound
card : Compatible with Sound Blaster 16 USB : Compatible
with a standard Universal Serial Bus that support
Plug-and-Play installation |
 |
|
|